New Era Pump Systems, Syringe Heater Kit (NEPS-HEATER-KIT-5SP)
Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.
- Available in 2 versions:
- 1LG Heating Pad: 3.5″ x 3.0″ LxW (9 cm x 7.5 cm)
- 5SP Heating Pad: 20″ x 0.625″ LxW (50 cm x 1.5 cm)
- Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.
- Multiple syringe heater pads can be attached to the control unit, under restricted conditions.
- Set point and other parameters retained in memory
- Digitally sets the heater set point
- Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.
- Dual temperature sensors in primary heating pad.
- Alarm modes with multiple layers of protection to prevent temperature overrun.
- Additonal heat protection for the pump may be needed when heating syringes above 100°C.
- If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.
Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.